(Backdrop
not included)
|
The Studio Objectmaker™
|
- For filming objects up to a
sphere 6 ft in diameter and 330 lbs.
- Requires at least 9’ x 10’ x 9’
high to set up
- Six leveling feet for use on a
slightly irregular surface
- Structure made from two 3 x
3 x 60 T-slotted aluminum posts
supported by a 21 x 102 rectangular
frame constructed of 1.5 x 3 T-slotted aluminum
- 4.5 amp two-phase 36:1 stepper
gear motor (a motor on each leg of the camera swing arm provides the necessary
strength and stability for a precise and repeatable shoot).
- 1/5 pitch timing-belt drive
train with gear ratio of 5:1 for a total gear ratio of 180:1
- Dual-axis controller/driver
- Stand-alone motion-control and
image-capturing software captures images from a video feed and sends them to
a
user-selected folder.. The images can be grabbed on the fly, i.e., while the
turntable is moving. This allows the user to film objects in much less time
than previously possible. The software works with Nikon Capture and the Nikon
professional dSLRs as well as with other digital capture programs for automatically
triggering
cameras. A still camera (digital or film) with an electric cable release can
also be used for automatic capture.
- The images
created using this application can be subsequently formatted into an object
movie using third-party software such as QTVR® Authoring Studios or VRToolworx.
- comes with two heavy-duty
shipping cases.
Close Window
|